Temporary Floor Protection - A Product Guide

Temporary Floor Protection - A Product Guide

Your floors need special protection when undergoing remodeling, throughout new development, moving heavy furniture or equipment, and for other events beyond day-to-day use. Protecting flooring makes sense and saves money. A spill of paint, the drop of a hammer, a scratch from heavy furniture can cost 1000's of dollars in replacement and repair costs. This article describes surface protection products for floors as a way to make informed choices on the most effective product to use in your needs.

Types of Protection Packaging:

Floor protection products are commonly packaged as either:

(1) Products by the roll: These include frequent adhesive films, rolled paper products and rolled textile protection. Protective materials purchased by the roll are commonly measured in thickness by mils (e.g., 2.5 mils thick as much as forty eight mils thick).

(2) Products by the sheet: These include corrugated plastic, masonite, and different rigid protection. Protective materials purchased by the sheet are commonly measured in thickness by the inch (e.g., 1/4-inch thick) and usually come as 4 ft by eight feet.

Type of Flooring Protection:

Paper

Paper protection is suitable for all hard surfaces and resilient surfaces however does not work well to protect carpets as it can tear when flexing under footsteps. Paper products are breathable so that glue fumes and cement curing vapors can escape. One disadvantage to paper products as they require tapes to safe them to flooring and tapes can often go away adhesive residue when removed. Widespread paper protection products include:

· Ramboard™ A coated compressed paper board 38 mils thick that is breathable, waterproof and made from recycled paper.

· Kraft paper is a lightweight brown paper that's inexpensive however does not afford any impact protection and might simply tear

· Scrim paper could incorporate coatings or reinforcements to make them water resistant as well as scrim threads to reinforce the paper and prevent tearing. These improved papers are longer lasting than common Kraft paper or rosin paper nonetheless they are also too thin to offer much impact protection.

· Rosin paper is thicker than Kraft paper and may be very low cost. Rosin paper is recycled, felt paper that ranges from 9.0 to 11.5 mils thick. The large drawback of using Rosin paper is that it might cause a permanent stain if the paper gets wet. Rosin paper may rip easily so it not usually really helpful for use

· Corrugated cardboard rolls or sheets can be used to protect flooring. Corrugate provides impact protection nevertheless it isn't coated with a water-proof finish and must be kept dry at all times in order that it does not disintegrate. Cardboard products are additionally available as single-, double-, and triple-walled corrugated cardboard sheets or as a fan-folded stack.

Polyethylene Film

Polyethylene (PE) films are sold as self adhesive rolled films various from 2.0 as much as 3.5 mils in thickness. They trap any moisture from escaping so they should not be used on any floors that are curing. Two of the nice benefits of polyethylene films are that films will flex and contour so they can be used on carpets as well as hard surfaces. These films do not offer any impact protection and are usually rated for short term use of 30 to 90 days only. Polyethylene films are designed for one-time use and do not use recycled supplies making them a poor selection in sustainable protection. Protection films are available in quite a lot of adhesion "tack". Hard surface protection films may have a decrease tack and shade than carpet protection which needs a more aggressive glue to hold onto carpet fibers successfully.

Wood Products

Plywood and Masonite are commonly used as protection on commercial projects with lots of foot traffic. Masonite is a wood product made from wood fibers unlike plywood which is an precise sheet of thin wood. Each plywood and Masonite are sold in the usual size of four feet by 8 feet and are more expensive per sq. foot than paper or polyethylene products. Masonite is commonly 1/eight or 1/4 inch thick. Plywood is commonly 1/4 inch to 3/4 inch thick. Both products provide impact protection on quite a lot of floor types and provide adequate protection towards heavy equipment use or furniture moving. Each plywood and Masonite are breathable and reusable nonetheless they are bulky to carry and store. These wood sheets ought to be used on prime of a softer protection equivalent to a rolled textile as they simply scratch flooring. These sheets work well to protect carpet as they prevent wrinkles when rolling heavy loads over the carpet. Plywood and Masonite don't supply moisture protection and can be harder to cut to measurement than different protection types.

If you loved this short article and you would like to get much more details concerning corex kindly stop by our own web page.

Actividad Cultural

Directorio

Contáctanos

Av. Honorio Delgado 430, Urb. Ingeniería, S.M.P. Lima - Perú.

  • Teléfono: (51-1)319-0000 // Anexo: 2215

Conectate

Conéctate con Nosotros

Siguenos en Redes Sociales.